·        ISO 100:1984 Pulleys for flat transmission belts—Crowns [Withdrawn: replaced with ISO 22]

·        ISO 102:1990 Aircraft—Gravity filling orifices

·        ISO 104:2015 Rolling bearings—Thrust bearings—Boundary dimensions, general plan

·        ISO 105 Textiles — Tests for colour fastness

·        ISO 105-A01:2010 Part A01: General principles of testing

·        ISO 105-A02:1993 Part A02: Grey scale for assessing change in colour

·        ISO 105-A03:1993 Part A03: Grey scale for assessing staining

·        ISO 105-A04:1989 Part A04: Method for the instrumental assessment of the degree of staining of adjacent fabrics

·        ISO 105-A05:1996 Part A05: Instrumental assessment of change in colour for determination of grey scale rating

·        ISO 105-A06:1995 Part A06: Instrumental determination of 1/1 standard depth of colour

·        ISO 105-A08:2001 Part A08: Vocabulary used in colour measurement

·        ISO 105-A11:2012 Part A11: Determination of colour fastness grades by digital imaging techniques

·        ISO 105-B01:2014 Part B01: Colour fastness to light: Daylight

·        ISO 105-B02:2014 Part B02: Colour fastness to artificial light: Xenon arc fading lamp test

·        ISO 105-B03:1994 Part B03: Colour fastness to weathering: Outdoor exposure

·        ISO 105-B04:1994 Part B04: Colour fastness to artificial weathering: Xenon arc fading lamp test

·        ISO 105-B05:1993 Part B05: Detection and assessment of photochromism

·        ISO 105-B06:1998 Part B06: Colour fastness and ageing to artificial light at high temperatures: Xenon arc fading lamp test

·        ISO 105-B07:2009 Part B07: Colour fastness to light of textiles wetted with artificial perspiration

·        ISO 105-B08:1995 Part B08: Quality control of blue wool reference materials 1 to 7

·        ISO 105-B10:2011 Part B10: Artificial weathering—Exposure to filtered xenon-arc radiation

·        ISO 105-C06:2010 Part C06: Colour fastness to domestic and commercial laundering

·        ISO 105-C07:1999 Part C07: Colour fastness to wet scrubbing of pigment printed textiles

·        ISO 105-C08:2010 Part C08: Colour fastness to domestic and commercial laundering using a non-phosphate reference detergent incorporating a low-temperature bleach activator

·        ISO 105-C09:2001 Part C09: Colour fastness to domestic and commercial laundering—Oxidative bleach response using a non-phosphate reference detergent incorporating a low temperature bleach activator

·        ISO 105-C10:2006 Part C10: Colour fastness to washing with soap or soap and soda

·        ISO 105-C12:2004 Part C12: Colour fastness to industrial laundering

·        ISO 105-D01:2010 Part D01: Colour fastness to drycleaning using perchloroethylene solvent

·        ISO 105-D02:2016 Part D02: Colour fastness to rubbing: Organic solvents

·        ISO 105-E01:2013 Part E01: Colour fastness to water

·        ISO 105-E02:2013 Part E02: Colour fastness to sea water

·        ISO 105-E03:2010 Part E03: Colour fastness to chlorinated water (swimming-pool water)

·        ISO 105-E04:2013 Part E04: Colour fastness to perspiration

·        ISO 105-E05:2010 Part E05: Colour fastness to spotting: Acid

·        ISO 105-E06:2006 Part E06: Colour fastness to spotting: Alkali

·        ISO 105-E07:2010 Part E07: Colour fastness to spotting: Water

·        ISO 105-E08:1994 Part E08: Colour fastness to hot water

·        ISO 105-E09:2010 Part E09: Colour fastness to potting

·        ISO 105-E10:1994 Part E10: Colour fastness to decatizing

·        ISO 105-E11:1994 Part E11: Colour fastness to steaming

·        ISO 105-E12:2010 Part E12: Colour fastness to milling: Alkaline milling

·        ISO 105-E13:1994 Part E13: Colour fastness to acid-felting: Severe

·        ISO 105-E14:1994 Part E14: Colour fastness to acid-felting: Mild

·        ISO 105-E16:2006 Part E16: Colour fastness to water spotting on upholstery fabrics

·        ISO 105-F01:2001 Part F01: Specification for wool adjacent fabric

·        ISO 105-F02:2009 Part F02: Specification for cotton and viscose adjacent fabrics

·        ISO 105-F03:2001 Part F03: Specification for polyamide adjacent fabric

·        ISO 105-F04:2001 Part F04: Specification for polyester adjacent fabric

·        ISO 105-F05:2001 Part F05: Specification for acrylic adjacent fabric

·        ISO 105-F06:2000 Part F06: Specification for silk adjacent fabric

·        ISO 105-F07:2001 Part F07: Specification for secondary acetate adjacent fabric

·        ISO 105-F09:2009 Part F09: Specification for cotton rubbing cloth

·        ISO 105-F10:1989 Part F10: Specification for adjacent fabric: Multifibre

·        ISO 105-G01:2016 Part G01: Colour fastness to nitrogen oxides

·        ISO 105-G02:1993 Part G02: Colour fastness to burnt-gas fumes

·        ISO 105-G03:1993 Part G03: Colour fastness to ozone in the atmosphere

·        ISO 105-G04:2016 Part G04: Colour fastness to oxides of nitrogen in the atmosphere at high humidities

·        ISO 105-J01:1997 Part J01: General principles for measurement of surface colour

·        ISO 105-J02:1997 Part J02: Instrumental assessment of relative whiteness

·        ISO 105-J03:2009 Part J03: Calculation of colour differences

·        ISO 105-J05:2007 Part J05: Method for the instrumental assessment of the colour inconstancy of a specimen with change in illuminant (CMCCON02)

·        ISO 105-N01:1993 Part N01: Colour fastness to bleaching: Hypochlorite

·        ISO 105-N02:1993 Part N02: Colour fastness to bleaching: Peroxide

·        ISO 105-N03:1993 Part N03: Colour fastness to bleaching: Sodium chlorite (mild)

·        ISO 105-N04:1993 Part N04: Colour fastness to bleaching: Sodium chlorite (severe)

·        ISO 105-N05:1993 Part N05: Colour fastness to stoving

·        ISO 105-P01:1993 Part P01: Colour fastness to dry heat (excluding pressing)

·        ISO 105-P02:2002 Part P02: Colour fastness to pleating: Steam pleating

·        ISO 105-S01:1993 Part S01: Colour fastness to vulcanization: Hot air

·        ISO 105-S02:1993 Part S02: Colour fastness to vulcanization: Sulfur monochloride

·        ISO 105-S03:1993 Part S03: Colour fastness to vulcanization: Open steam

·        ISO 105-X01:1993 Part X01: Colour fastness to carbonizing: Aluminium chloride

·        ISO 105-X02:1993 Part X02: Colour fastness to carbonizing: Sulfuric acid

·        ISO 105-X04:1994 Part X04: Colour fastness to mercerizing

·        ISO 105-X05:1994 Part X05: Colour fastness to organic solvents

·        ISO 105-X06:1994 Part X06: Colour fastness to soda boiling

·        ISO 105-X07:1994 Part X07: Colour fastness to cross-dyeing: Wool

·        ISO 105-X08:1994 Part X08: Colour fastness to degumming

·        ISO 105-X09:1993 Part X09: Colour fastness to formaldehyde

·        ISO 105-X10:1993 Part X10: Assessment of migration of textile colours into polyvinyl chloride coatings

·        ISO 105-X11:1994 Part X11: Colour fastness to hot pressing

·        ISO 105-X12:2016 Part X12: Colour fastness to rubbing

·        ISO 105-X13:1994 Part X13: Colour fastness of wool dyes to processes using chemical means for creasing, pleating and setting

·        ISO 105-X14:1994 Part X14: Colour fastness to acid chlorination of wool: Sodium dichloroisocyanurate

·        ISO 105-X16:2016 Part X16: Colour fastness to rubbing—Small areas

·        ISO 105-X18:2007 Part X18: Assessment of the potential to phenolic yellowing of materials

·        ISO 105-Z01:1993 Part Z01: Colour fastness to metals in the dye-bath: Chromium salts

·        ISO 105-Z02:1993 Part Z02: Colour fastness to metals in the dye-bath: Iron and copper

·        ISO 105-Z03:1996 Part Z03: Intercompatibility of basic dyes for acrylic fibres

·        ISO 105-Z04:1995 Part Z04: Dispersibility of disperse dyes

·        ISO 105-Z05:1996 Part Z05: Determination of the dusting behaviour of dyes

·        ISO 105-Z06:1998 Part Z06: Evaluation of dye and pigment migration

·        ISO 105-Z07:1995 Part Z07: Determination of application solubility and solution stability of water-soluble dyes

·        ISO 105-Z08:1995 Part Z08: Determination of solubility and solution stability of reactive dyes in the presence of electrolytes

·        ISO 105-Z09:1995 Part Z09: Determination of cold water solubility of water-soluble dyes

·        ISO 105-Z10:1997 Part Z10: Determination of relative colour strength of dyes in solution

·        ISO 105-Z11:1998 Part Z11: Evaluation of speckiness of colorant dispersions

·        ISO 108:1976 Textile machinery and accessories—Weaving looms—Definition of left and right sides

·        ISO 109:1982 Textile machinery—Working widths of weaving machines

·        ISO 110:1978 Textile machinery and accessories—Cones for yarn winding (cross wound) – Half angle of the cone 9 degrees 15' [Withdrawn without replacement]

·        ISO 111:1978 Textile machinery and accessories—Cones for yarn winding (cross wound) – Half angle of the cone 4 degrees 20' [Withdrawn: Replaced with ISO 8489-3]

·        ISO 112:1983 Textile machinery and accessories—Cones for yarn winding (cross wound) – Half angle of the cone 3 degrees 30' [Withdrawn: Replaced with ISO 8489-2]

·        ISO 113:2010 Rolling bearings—Plummer block housings—Boundary dimensions

·        ISO 114:1980 99.8 Unalloyed magnesium ingots—Chemical composition [Withdrawn: Replaced by ISO 8287]

·        ISO 115:2003 Unalloyed aluminium ingots for remelting—Classification and composition

·        ISO 119:1977 Plastics—Phenol-formaldehyde mouldings—Determination of free phenols—Iodometric method

·        ISO 120:1977 Plastics—Phenol-formaldehyde mouldings—Determination of free ammonia and ammonium compounds—Colorimetric comparison method

·        ISO 121:1980 Magnesium-aluminium-zinc alloy ingots and alloy castings—Chemical composition and mechanical properties of sand cast reference test bars [Withdrawn: replaced by ISO 16220]

·        ISO 123:2001 Rubber latex—Sampling

·        ISO 124:2014 Latex, rubber—Determination of total solids content

·        ISO 125:2011 Natural rubber latex concentrate—Determination of alkalinity

·        ISO 126:2005 Natural rubber latex concentrate—Determination of dry rubber content

·        ISO 127:2012 Rubber, natural latex concentrate—Determination of KOH number

·        ISO 128 Technical product documentation (TPD)—General principles of presentation^{[Note 3]}

·        ISO 129 Technical product documentation (TPD)—Indication of dimensions and tolerances^{[Note 3]}

·        ISO 129-1:2004 Part 1: General principles

·        ISO 129-4:2013 Part 4: Dimensioning of shipbuilding drawings

·        ISO 131:1979 Acoustics—Expression of physical and subjective magnitudes of sound or noise in air [Withdrawn without replacement]

·        ISO 132:2017 Rubber, vulcanized or thermoplastic—Determination of flex cracking and crack growth (De Mattia)

·        ISO 133:1983 Rubber, vulcanized—Determination of crack growth (De Mattia) [Withdrawn: Replaced with ISO 132]

·        ISO 136:1972 Steel—Simple torsion testing of wire [Withdrawn replaced by ISO 7800]

·        ISO 137:2015 Wool—Determination of fibre diameter—Projection microscope method

·        ISO 139:2005 Textiles—Standard atmospheres for conditioning and testing

·        ISO 140 Acoustics—Measurement of sound insulation in buildings and of building elements

·        ISO 140-2:1991 Part 2: Determination, verification and application of precision data [Withdrawn: replaced by ISO 12999-1:2014]

·        ISO 140-4:1998 Part 4: Field measurements of airborne sound insulation between rooms [Withdrawn: replaced by ISO 16283-1:2014]

·        ISO 140-5:1998 Part 5: Field measurements of airborne sound insulation of façade elements and façades [Withdrawn: replaced by ISO 16283-1:2014]

·        ISO 140-7:1998 Part 7: Field measurements of impact sound insulation of floors [Withdrawn: replaced by ISO 16283-1:2014]

·        ISO 140-14:2004 Part 14: Guidelines for special situations in the field [Withdrawn: replaced by ISO 16283-1:2014]

·        ISO 140-14:2004/Cor 1:2007

·        ISO 140-18:2006 Part 18: Laboratory measurement of sound generated by rainfall on building elements [Withdrawn: replaced by ISO 10140-1:2016]

·        ISO 141:1976 Textile machinery and accessories—Pirn winders and cross winders—Definition of left and right sides

·        ISO 142:1976 Textile machinery and accessories—Weaving preparatory machines—Definition of left and right sides

·        ISO 143:1977 Textile machinery and accessories—Weft pirns for automatic looms [Withdrawn without replacement]

·        ISO 144:1973 Steel—Reverse bend testing of wire [Withdrawn: replaced with ISO 7801]

·        ISO 146:1984 Metallic materials—Hardness test—Verification of Vickers hardness testing machines HV 0,2 to HV 100 [Withdrawn replaced with ISO 6507-2]

·        ISO 146-2:1993 Metallic materials—Verification of Vickers hardness testing machines—Part 2: Less than HV 0,2 [Withdrawn replaced with ISO 6507-2]

·        ISO 148 Metallic materials—Charpy pendulum impact test

·        ISO 148-1:2016 Part 1: Test method

·        ISO 148-2:2016 Part 2: Verification of testing machines

·        ISO 148-3:2016 Part 3: Preparation and characterization of Charpy V-notch test pieces for indirect verification of pendulum impact machines

·        ISO 150:2006 Raw, refined and boiled linseed oil for paints and varnishes—Specifications and methods of test

·        ISO 155:1998 Belt drives—Pulleys—Limiting values for adjustment of centres

·        ISO 156:1982 Metallic materials—Hardness test—Verification of Brinell hardness testing machines [Withdrawn replaced by ISO 6506-2]

·        ISO 157:1996 Coal—Determination of forms of sulfur

·        ISO 160:1980 Asbestos-cement pressure pipes and joints [Withdrawn without replacement]

·        ISO 161 Thermoplastics pipes for the conveyance of fluids—Nominal outside diameters and nominal pressures

·        ISO 161-1:1996 Part 1: Metric series

·        ISO 161-2:1996 Part 2: Inch-based series

·        ISO 162:1985 Cinematography—Head gaps and sound records for three-, four-, or six-track magnetic sound records on 35 mm and single-track on 17,5 mm motion-picture film containing no picture—Positions and width dimensions

·        ISO 171:1980 Plastics—Determination of bulk factor of moulding materials

·        ISO 172:1978 Plastics—Phenol-formaldehyde mouldings—Detection of free ammonia

·        ISO 174:1974 Plastics—Homopolymer and copolymer resins of vinyl chloride—Determination of viscosity number in dilute solution [Withdrawn replaced by ISO 1628-2]

·        ISO 175:2010 Plastics—Methods of test for the determination of the effects of immersion in liquid chemicals

·        ISO 176:2005 Plastics—Determination of loss of plasticizers—Activated carbon method

·        ISO 177:2016 Plastics—Determination of migration of plasticizers

·        ISO 178:2010 Plastics—Determination of flexural properties

·        ISO 179 Plastics—Determination of Charpy impact properties

·        ISO 179-1:2010 Part 1: Non-instrumented impact test

·        ISO 179-2:1997 Part 2: Instrumented impact test

·        ISO 180:2000 Plastics—Determination of Izod impact strength

·        ISO 182 Plastics—Determination of the tendency of compounds and products based on vinyl chloride homopolymers and copolymers to evolve hydrogen chloride and any other acidic products at elevated temperatures

·        ISO 182-1:1990 Part 1: Congo red method

·        ISO 182-2:1990 Part 2: pH method

·        ISO 182-3:1993 Part 3: Conductometric method

·        ISO 182-4:1993 Part 4: Potentiometric method

·        ISO 185:2005 Grey cast irons - Classification

·        ISO 186:2002 Paper and board - Sampling to determine average quality

·        ISO 187:1990 Paper, board and pulps - Standard atmosphere for conditioning and testing and procedure for monitoring the atmosphere and conditioning of samples

·        ISO 188:2011 Rubber, vulcanized or thermoplastic - Accelerated ageing and heat resistance tests

·        ISO 196:1978 Wrought copper and copper alloys - Detection of residual stress - Mercury(I) nitrate test

·        ISO 197 Copper and copper alloys - Terms and definitions

·        ISO 197-1:1983 Part 1: Materials

·        ISO 197-2:1983 Part 2: Unwrought products (Refinery shapes)

·        ISO 197-3:1983 Part 3: Wrought products

·        ISO 197-4:1983 Part 4: Castings

·        ISO 197-5:1980 Part 5: Methods of processing and treatment

·        ISO 199:2014 Rolling bearings - Thrust bearings - Geometrical product specification (GPS) and tolerance values